Hardware, Fasteners, Accessories

WASHER, COUNTERSUNK

Access Extractor Handle In Trapezoidal Form

BOLT

D-Sub Tools & Hardware DSUB ACC: FERRULE

WASHER

Access Extractor Handle In Trapezoidal Form

Pomona Banana Plug w/ Solder Lug and 0.50 (12.7mm) Threaded Stud, 15A

HellermannTyton BLACK CABLE TIE

SCREW CAPTIVE M4x7

SCREW M4x16 SOPRAL P65 ALUMIN ANOD=IZED ISO1207

Multi-Contac

SPACER, STAND OFF

Riv Nut A10K75

NITRILE O-RING, GENERAL PURPOSE

NITRILE O-RING, GENERAL PURPOSE

NITRILE O-RING, GENERAL PURPOSE

ITT Cannon Floating Plate

Southco Quarter Turn Fastener Size 3 Steel Zinc Plate, Bright chromate 6.350mm Stud

Hand Crimping Tool 0.5-6 mm2 6.3 mm

Ring Retaining

Ground Stud

Screws Shoulder Steel Pan Head Slotted Phillips Combo Drive

PEM NUT

HEX HD BOLT

HEX HD BOLT

SPACER, STAND OFF

INSUL RING LUG

SPACER, STAND OFF

BEARING

Isolator Mount (DE-792)

screw, length: 1/2\", thread: 4-40, socket cap head, cadmium plated alloy steel,

screw, length: 1/2\", thread: 4-40, socket cap head, cadmium plated alloy steel,

2PC SLEEVE BOLT ASSEMBLY PART#3M1250AC6-6A

HINGE PIN

RIVET

Hubbell STRAIGHT MALE THREAD, STAINLESS STEEL MESH,

Self-Locking Nut

Sleeve Bolt Assembly

DINRAIL ADAPTER UNIVERSAL Series: CLIPLINE Hardware Type: Adapter Specifications: 10.0mm x 43.0mm x 19.0mm For Use With/Related Products: Din Rail Track

HARNESS BOARD NAIL Series: HBN Hardware Type: Nail (Steel, Nickel Plated) Specifications: 0.093" Dia, 2.66" Total Length, 2.00" Exposed Length For Use With/Related Products: Harness Board

FERRULE RND HANDLE .156"THR BRS Hardware Type: Ferrule Specifications: Brass, 4-40 Thread, 0.250" OD, 0.120" ID For Use With/Related Products: For use with Round Handles

COVER LABEL CLEAR PLASTIC Series: AMP Hardware Type: Cover Specifications: - For Use With/Related Products: -

TAMPER PROOF SEALANT 5OZ TUBE Series: Scotch-Seal™ Hardware Type: Sealant, Tamper Proof Specifications: 3M™ Scotch-Seal™, White, 5 oz. Tube For Use With/Related Products: Protect settings and calibrations of electronic components

DIN RAIL END PIECE NS35/7.5 Hardware Type: End Cap Specifications: 37.5mm x 7.0mm x 9.0mm For Use With/Related Products: Din Rail Track

HARNESS BOARD NAIL Series: HBN Hardware Type: Nail (Steel, Nickel Plated) Specifications: 0.075" Dia, 1.65" Total Length, 1.00" Exposed Length For Use With/Related Products: Harness Board

DINRAIL ADAPTER FOR 5MM SCREWS Series: CLIPLINE Hardware Type: Adapter Specifications: 10.0mm x 43.0mm x 19.0mm For Use With/Related Products: Din Rail Track

KLIPET CAPILLARY CLIP GRAY Series: Klipet® Hardware Type: Capillary Clip Specifications: Gray For Use With/Related Products: Holds 1/8", 1/4" and 3/8" Tubing

KLIPET CAPILLARY CLIP NATURAL Series: Klipet® Hardware Type: Capillary Clip Specifications: Natural For Use With/Related Products: Holds 1/8", 1/4" and 3/8" Tubing

HARNESS BOARD NAILS Series: HBN Hardware Type: Nail (Steel, Nickel Plated) Specifications: 0.122" Dia, 3.67" Total Length, 3.00" Exposed Length For Use With/Related Products: Harness Board

DINRAIL SUPPORT INSULATING Series: CLIPLINE Hardware Type: Support Specifications: 35.0mm x 38.0mm x 21.0mm For Use With/Related Products: Din Rail Track